Due to the complex structure of the diesel generator set, many users buy the diesel generator set, but do not know how to operate it and maintain it, the following will introduce some precaution for ensuring good operation of Hosem Power diesel generator set:   What happens if the diesel generator is overloaded for a long time?   Genset usually cannot be overloaded when operating but can withstand short-term overloads. If the unit overload time is too long (exceed Overrated power) something can happen. Include: Overheating of cooling system Generator winding overheating Low oil pressure due to decomposition of lubricating oil concentration Unit life is shortened   What happens if the unit load is too low?   If the unit is operated at low load for a long time, the water temperature can not rise to the normal temperature, the viscosity of oil is large, and the friction becomes larger. The oil that should be burning in the cylinder is heated, causing paint to form on t...

Fuel consumption is an important index to measure the performance of Genset, in our daily use, there are ways to reduce fuel consumption:   1.To make reasonable use of the Industrial generator set, it must first be used within the rated power range. Overloaded use will definitely increase the operating burden of the generator set and reduce the service life of the equipment. Unit damage, with the increase of the number of use, fuel consumption is bound to be higher   2. before the generator set is used, two layers of silk cloth can be added to the filter screen of the oil supply system to improve the combustion rate by reducing impurities in the oil, so as to reduce fuel consumption, or two layers of oil can be carried out first. Wait for four days to settle, then use   3. the generator set is usually cooled by air cooling and water cooling system during operation, but if the temperature is too low when starting, it will reduce the viscosity of oil and reduce the movemen...

Site Selection and Layout Guide for Diesel Generator Installation Diesel generator sets are widely used as standby or emergency power sources across various industries. To ensure optimal performance, safety, ease of maintenance, and environmental compliance, careful planning of the installation site is essential. While installation requirements may vary based on specific environments, all locations must meet the basic conditions for the diesel generator’s reliable operation and serviceability.     Site Foundation and Environmental Requirements 1. Load Bearing and Surface Leveling:The ground must support the full weight of the generator set. A concrete foundation is typically recommended, with a surface flatness deviation of no more than ±3mm per meter to reduce vibration transmission. For large generators, embedded anchor bolts should be pre-installed. 2. Space Requirements:Maintain a minimum clearance of 1.5 meters around the generator and at least 1 meter above...